Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
1 valve shut off hot water tank valve
[ 9 Answers ]
I was just trying to get some Pro's thoughts on, why there would be a shut off valve on the hot line going out of my hot water tank, and no valve on the cold coming in? Is there a reason for this? Is it OK to add a valve on the cold,so I can isolate the tank, by shuting both valves , and would...
Shut off valve
[ 1 Answers ]
Does anyone know anything about these white,plastic,push/pull shut off valves? I have them on my toilets and recently one has started making a spitting,rushing type sound when it is refilling.I replaced the fill valve and tried to clean out the supply line. It seemed to help a bit,but it is still...
Icemaker replacement water valve needs minor modifications
[ 4 Answers ]
I have a kenmore icemaker that leaks water . I'm sure the water supply valve needs replacing . My question is this. The original valve ( WR57X0110 ) is no longer in production The replacement valve (WR57X10033) is not a direct replacement . It needs some minor modifications . Can someone help me...
No Shut Off Valve between water heater and bathroom sink valve
[ 14 Answers ]
I have a constant drip in my bathroom sink. After a little trouble shooting, I came to the conclusion that my hot water valve underneath the sink is the culprit. I traced the pipe down the wall, into the basement and to the water heater. The only thing between the water heater and the old valve in...
Icemaker - Solenoid valve?
[ 2 Answers ]
I know that many people have posted that the water-in-the-door type side-by-sides have problems with leaks that are due to valve problems. My issue is that there is a very slow leak into the ice-maker. After several days, the water overflows the tray and also freezes in the dispenser hose making... View more questions Search
|