Ask Experts Questions for FREE Help !
Ask
    mary64's Avatar
    mary64 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2011, 02:58 PM
    Water was running in 2 radiators , I bleed them but it didn't fix the problem
    As the radiators were not heating up all the way and now the system has stopped working,please help
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Nov 17, 2011, 04:22 PM
    Check the pressure gauge on the boiler and let me know what it reads.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to install a bleed valve to a base-board radiators [ 1 Answers ]

How to fix water leaking onto the floor when shower is running? [ 1 Answers ]

I have a new home. I discovered that while my shower in my guest bathroom is running, eventually, water pools on the edge of the tub and continues until it falls over. With the shower running for 20 minutes with no one in it with the shower curtain lining inside of the tub, I could have a...

Radiators cold, but don't bleed fully [ 2 Answers ]

My upstairs radiators are only warm at the bottom, but when I bleed them they only let out a small amount of air, never fill up and all the radiators upstairs start bubbling. We have a combi boiler (oldy but goody) Worcester Bosch Highflow 400 feeding 5 downstair radiators (which are all piping hot...

Why does water still come out of tub spout why shower is running and how do I fix it [ 2 Answers ]

Why does water still come out of tub spout while shower is running and how do I fix it

View more questions Search