Ask Experts Questions for FREE Help !
Ask
    butlerb's Avatar
    butlerb Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Nov 16, 2011, 06:21 PM
    Hampton bay remote receiver
    We just installed a receiver box on our fan. Everything works except we can not get the remote to work with the lights, it only work with the fan. What do we need to do? I know some wires must not be where they need to be
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 16, 2011, 09:15 PM
    If you installed the correct receiver it would have four wires coming out to the fan. White is neutral and common to fan and light. Black is hot to fan. Blue is hot to light kit and green or bare is ground. Is this what you saw coming out of the receiver?
    butlerb's Avatar
    butlerb Posts: 6, Reputation: 1
    New Member
    		  
    #3

    Nov 17, 2011, 06:51 AM
    We also have a orange for the up light which we connected to the hot also with the blue. We had to buy a replacement receiver because the other one went out but we have the same remote. The remote works the fan but do not work the light.
    butlerb's Avatar
    butlerb Posts: 6, Reputation: 1
    New Member
    		  
    #4

    Nov 17, 2011, 06:55 AM
    One side has a black, blue, white and orange. The other side has a black and blue. We connected the white to whithe and the black,blue and orange all together to the hot wire. Is there something we are doing wrong or do we have to buy another remote
    butlerb's Avatar
    butlerb Posts: 6, Reputation: 1
    New Member
    		  
    #5

    Nov 17, 2011, 08:39 AM
    I am sorry , I meant one side has 4 wires a white,blue,black and orange wire and the other side has 2 wires black and a white one
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #6

    Nov 17, 2011, 09:30 AM
    OK the side with only black and white is your side feeding power to the receiver, input. The other side with 4 wires is output. White-neutral, black-hot to fan, blue - hot to light kit. Orange? Not seen orange but the only thing missing is ground which is normally green or bare. Can you tell me the model receiver you installed, did it come with a new transmiter?
    butlerb's Avatar
    butlerb Posts: 6, Reputation: 1
    New Member
    		  
    #7

    Nov 17, 2011, 09:43 AM
    Sorry I do have a green for the ground. The orange is on the same side with the other 3 wires. This hamptom bay fan has a upling and a down light. The blue is the up and the orange is the down. The orange will connect just like the blue. Everything is working but I can only control the fan with the remote and not the lights. So I am guessing the remote for the lights is wired wrong so can you help me
    butlerb's Avatar
    butlerb Posts: 6, Reputation: 1
    New Member
    		  
    #8

    Nov 17, 2011, 09:46 AM
    The receiver we bought is Uc7067rc and we have the same remote. The receiver is just like the old one
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Fan 9T remote receiver? [ 4 Answers ]

Hello, I have surfed and surfed with no results. I have the Hampton Bay digital ceiling fan remote and it does not work anymore. I think it is the receiver that mounts at the fan. Any ideas on where to get a new one? Thanks so much for any replies...

Hampton Bay Ceiling Fan Remote Receiver [ 12 Answers ]

Have a Northport III 52" ceiling fan and can't figure out where to place the remote receiver. The installation manual says to place it in the upper canopy, but there's not enough room and after installing I can't secure the canopy. Any ideas on what I'm doing wrong?:confused:

Hampton bay 52A4h4L remote receiver location [ 1 Answers ]

Hi, Where can I find the Hampton bay 52A4h4L remote receiver? I looked at the canopy, it's not there. I couldn't operate this fan/light using the remote, of course there is no pull chain for this model. Also, once I find the remote receiver, if it's not a universal model, can I replace it...

Hampton Bay Ceiling fan not working with Receiver/Remote [ 5 Answers ]

Hi, I bought a Hampton Bay Ceiling fan with a remote. I was able to put up the fan and it works along with the lights. When I tried installing the receiver on the fan, the fan will not work, with the remote, nor manually, as almost like no power is going to it... As soon as I remove the...

Hampton Bay Redingtom IV Ceiling fan remote receiver [ 1 Answers ]

The yellow covered remote control receiver in the fan box is simply too big to fit in the decorative mounting bracket cover. The directions mention a receiver mounting bracket, that was not there, and wouldn't have fit inside either. Anyone had to deal with this yet? Instructions attached. Jim

View more questions Search