Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need to replace a non-brick chimney
[ 1 Answers ]
My chimney for the furnace is really in bad looking shape. It is also staining my shingles. It was crafted in 1969, it is some sort of wooden board material, it shreds, doesn't splinter. It is basically four pieces of whatever the stuff is stapled to a 2x4 framing system, with an 8 inch flue...
Replace brick in wood burning insert
[ 1 Answers ]
We have a Craft wood burning insert, there is a chip in the brick on the bottom, can we repair it or do we have to replace it. If we have to replace it how is that done. Thank you
Brick chimney removal
[ 7 Answers ]
Advice needed: There are 2 unused brick chimneys we have to remove in an old two–story house my son and I are rehabbing. We have quite a bit of experience at rehabbing but have never taken down chimneys before and would like advice on the best, shortest, safest way to do it and which are the best...
Replacing brick in outside chimney
[ 2 Answers ]
What is the best way to replace rotting bricks located in diff. spots above the heave in My outside chimney?
Flashing a rock chimney (not brick)
[ 5 Answers ]
Hey guys! This could be a long story but I'll keep it short. :) Pretty much my home inspector screwed me by overlooking an OBVIOUS leak in two places! Anyway, I have a leak in my garage attic around the chimney and also in the house attic around the chimney as well. The garage leak isn't too... View more questions Search
|