Ask Experts Questions for FREE Help !
Ask
    Pubzero's Avatar
    Pubzero Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 14, 2011, 08:17 PM
    Toilet won't flush everything?
    Both of my toilets have difficulty with flushing everything down. Most of the time it takes 2 or 3 flushes and sometimes 4 flushes. I have replaced the innards and still the same problem. I have low water pressure and hard water. The house was built in 2002. Should I replace the toilets or do y'all have a better suggestion?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 14, 2011, 08:58 PM
    With low pressure you may need to install a pressure bladder tank. However, make sure the rim holes are open. Look under the toilet rim to check that the holes are fully open. Clean them out with a coat hanger and also make sure the hole at the bottom of the bowl is open. Put your finger in the hole and flush, should get good flow to start the flush.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet flush: When I flush the toilet the water does not wash all around the bowl. [ 10 Answers ]

Toilet flush: When I flush the toilet the water does not wash all around the bowl. There is always a section at the front that doesn't get washed. I have tried pushing the end of a wire coat hanger around the rim, and I have used copious amounts of cleaner. Does anyone have any suggestions?

After I flush my toilet the water level in the toilet bowl itself is always very low. [ 2 Answers ]

After I flush my toilet the water level in the toilet bowl itself is always very low. How can I fix this issue. Thanks!

Toilet Flushing: tank drains, toilet doesn't flush, brand new toilet. [ 4 Answers ]

I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...

Toilet flush cause howling sound after flush [ 2 Answers ]

AFter flushing the toilet, there is a howling sound. If I turn the water on when it starts the noise stops. This is only occurring in one of the 3 bathrooms.

First Flush of Toilet does NOT work right BUT second flush works great? [ 4 Answers ]

We have 2 toilets and both have the same problem. The first flush does NOT work right and will NOT flush completely, water rises and then goes back down. The second flash works GREAT? We have plunged and clean out all blow or jet holes NOthiNG is plugged? Short of double water bills and the...

View more questions Search