 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring for White Rodgers 1E30W-311 thermostat
I am trying to install a programmable thermostat Honeywell RTH2310; replacing my exsisting White Rodgers 1E30W-311, but the wiring doesn't match up.
I have a red and black wire attached to my current thermostat, and then a brown, green, orange and blue wire that aren't attached to anything. How do I hook that up to Rh, Rc, W,Y, G set up on my new thermostat? |
||||
|
||||
|
Do you have the installation directions for the new one? Most often the Rh and Rc get jumpered. Use this RTH2310B | 5-2 Day Programmable Thermostat to find the right direction. Tell us in detail about your current furnace and AC, we need to make sure this is the correct tstat for your app.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Need help wiring the White-Rodgers thermostats the Lennox Heating and Air Condiontiong that has 5 colour cables, B/W/R/O/G. I have the white-rodgers thermostats installed, the Furnace heating and Fan work as expected, but when switch to A/C, nothing happens, heard two click after switching to...
I have 2 wire (red & White) heat only system. It is steam heat run by gas. Currently I have Honeywell thermostat which uses 3 AA batteries. Thermostat has R, RC, O, W, Y, G terminals. R and RC terminals are connected by a jumper cable. I have Red wire connected to terminal R and white wire...
Hello, I have a new home, built in 2003, with Central Heat and Air. It's all run off electricity and is using a Lennox Model CB29M-41-1P heat pump. The WHITE ROGERS DIGITAL HEAT PUMP THERMOSTAT 1F89-211 used the following wires: White Red Brown Orange Yellow
View more questions Search
|
