 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant Plus 80 stopped working
I have a Bryant Plus 80 that stopped working - the gas burners weren't igniting. Brought in a repairman who replaced the pressure switch ($350) and... it didn't work. Now he's thinking it's the circuit board's relay switch which isn't working which means we need a new circuit board ($800 more). The circuit board gives a error code "23" which relates to the pressure switch not working so now I'm confused.
I can start the furnace manually by disconnecting the hose to the pressure switch until the fan cycles down and replacing it. That works until the thermostat tells it to shut off and then it won't refire. Here's my question: How do I know it's the circuit board? He seems to be certain - but then again, he was certain about the pressure switch. I'm out of my league here. :-( |
||||
Check out some similar questions!
The black wheel on the furnace does not always spin on it's own, and then the heat does not come on when we turn up the thermostat. If we start to spin it manually, it will kick on and spin on it's own, and then the heat kicks on. Could you tell me what's wrong and if we can fix it on our own?
Last night all of the sudden, the registers stopped blowing cool air. The indoor fan is still running and blowing air, there is just no temp split at all in relation to the rest of the house. The fan outside on the condenser is kicking on. What are the possibilities, and what tools are needed to...
Today while I was on the computer I started to feel like the heat was on. So I went to the thermostat and it said it was 86 inside the house and the heater was on. I don't know how this happened, I had the a/c on at 79 and it just suddenly stopped and switched to heat. I quickly turned the heat...
I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?
Hi Everyone A wall of electrical outlets in my kitchen just stopped working. They were working just fine about a month ago. I tried checking the circuit box, and turning the circuits on/off just to make sure anything that has been tripped was turned on back again. But it didn't work for the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
