 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace don`t heat
I was working with the pipe gas lines so I did shut off the gas and the electricity then I finish to work and I turn the gas back and the electricity the furnace fan start working and stay for a long time on and in the morning I find out that no heat coming out off the furnace start5 checking and on the circuit board the terminal w and c don`t have 24 volts and the thermostat also does`nt have electricity what can be the problem.
|
||||
Check out some similar questions!
I have a Bryant furnace about 10 yrs old. This is a furnace/central air unit located outside. The fan in auto posistion would not come on. Switched to on position and furnace lit and fan ran. Turned to auto and ran for several seconds and went off. Now on auto nothing works but if I turn the fan on...
I have a Bryant Gas Furnace Model 355AVV. It usually runs on low-stage heating if I have the temperature set to 74 degrees F. When it gets colder it doesn't seem to go to high-stage heating very often unless we turn up the thermostat to a much higher setting. It's like it isn't aware that the...
Last week when I got up for work I noticed the house warmer than normal. I found the electric heat strips still energized. Tstat was set for 70 house was 74. I do hvac work but deal with air handlers, chillers and small boilers, only residential when its mine. Anyway, I asked the guy at Johnstone...
Only Blow Cool Air Not Heat
Please help My furnace is not working and I know very little about it.. I was told it does not have pilot but has an ignitor... I turned it on yesterday but it didn't come on.. There is a glass mirror on the door that has a red light in it.. The red light brinks rapidly so I know it has power...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
