 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier WeatherMaker 8000 Gas Furnace
Just turned it on for the season. It runs for about 5 min. then kicks off. Code shows "Limit or Flame Roll-Out switch is open" and then changes to "Limit or Flame Roll-Out switch lockout." Any ideas as to what could be wrong? I replaced the air filter. The unit resets itself after 3 hrs but repeats the problem from scratch when I turn it back on.
|
||||
Check out some similar questions!
Where is filter located? What size is it? Thanks
I have a carrier weathermaker 8000.Furnace cycles but will not flame.I replaced glow coil and cleaned flame senser.The pressure switch is in open position.Any ideas?
How do I install the inducer motor assembly in weathermaker 8000 model 58wav gas furnace
My name is Chris and I have a weathermaker 8000 Furnace. The problem is that it won't light the gas, so there is not heat. I know that the gas is flowing. I also don't see a spark. There is no AC hooked to it either. Can anyone help me with this?
Hello everyone, I am trying to locate the reset switch on my Carrier Weathermaker 8000 furnace.Can anyone help me out? Thor T
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
