Check out some similar questions!
New RAM cards won't boot unless old RAM intalled also. RAM tested good.
[ 3 Answers ]
Just purchased (2) 256MB RDRAM (Rambus) PC-800MHz-45nS type memory ECC cards (used). Dell Dimension 8100 rated for up to 2GB RAM, (4 RAM sockets) originally had (2) 64MB non-ECC + (2) 128MB ECC cards. Worked fine. If I install the (2) new 256 ECC cards in Bank 1, leaving Bank 2 empty, PC won't...
Is it possible add or change my 2.26 GHz, 248 MB of RAM to higher RAM?
[ 5 Answers ]
I just need to know!
Can I use 1 gb ram along with 512 ram, or both should be same capacity. Because I amt
[ 2 Answers ]
I was using 512mb ram along with 1 gb ram, and there was frewuent problem of blue screen of death, after removing 1gb and with 512 alone there is no problem. Then how can I upgrade my ram. Mine is lenovo thinkcentre with pentium d processor and 512 mb ram
Difference between PC100 RAM and PC2100 RAM
[ 2 Answers ]
I was wondering what would happen if I put 512MB of DIMM PC2100 RAM in a Compaq laptop that calls for MB of DIMM PC100 RAM? I have the PC2100 RAM already and was wondering if it would be a big problem if the PC speed numbers didn't match up? Would the computer not run at all? It is real slow...
Question about DDR RAM..
[ 1 Answers ]
I'm looking into buying a new motherboard, the motherboard is DDR2 RAM. My question is: can you use regular DDR RAM in a DDR2 motherboard ? Reason I ask is because I already have 1G OF DDR RAM and I really don't want to spend any more money for DDR2 RAM. View more questions Search
Add your answer here.
|