Ask Experts Questions for FREE Help !
Ask
    shumatec's Avatar
    shumatec Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 8, 2011, 04:29 PM
    Wiring a TH106 Thermostat
    We have two electric fan heaters (120V) and a simple Honeywell thermostat with a temperature knob. We purchased an Aube TH106 programmable thermostat to replace the old one, but I'm having trouble wiring it up.

    There are two wires out the back of the TH106, but three (black) wires in the junction box. One seems to be the live feed and the other two, I'm guessing, go to each fan heater? The install manual described a two-wire install and a four-wire install, but I have three wires... I connected the live wire to one wire on the TH106, then connected both the other two to the remaining wire, but when I flipped the breaker back on there was no display on the TH106. I checked the connections and they seem sound, I couldn't get a wire loose or pull it out. Anyone have a suggestion?

Check out some similar questions!

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

I have a hot water heating system , the thermostat uses 12/2 wiring what thermostat [ 5 Answers ]

I am looking for a new thermostat for my home heating. I have an oil burner that uses water in baseboards ( I believe hydronic) the current theromstat uses a 12/2 wire that goes to it. This wire has a black, white and nuetral. The current thermostat is very straight forward and these wires...

Wiring direction for a multi wiring system thermostat! [ 3 Answers ]

I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.