 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
SCI-120A Korean ice machine
I'm working on a SCI-120A the owner said that it does not work and the water gets hot that is sprayed on the evaporator. I found that the fuse holder has a main power come into it and a wire(from the fuse) that goes to the fan which goes through a pressure switch. The wires were disconnected from the fuse, so I figured that when I put the new fuse holder in it would run. But all it did was the fan would come on for about 2 -5 seconds and shut off. Eventually it kicked out my circuit breaker(20amp). I also noticed that the compressor got pretty hot.
|
||||
Check out some similar questions!
Been having problems with this ice machine. Took it into a vacuum (500 microns) and added specified amount of 404A refrigerant. Energized machine and she pulls down to about 60 psi on the low side and about 320 on the high side. It is supposed to run about 20-40 on the low side and 220-280 on the...
Just did the emitter/receiver test and that tests good, i.e. solid red light displayed. There is no ice in the ice maker leading me to believe that it must be a problem with the filler tube and or water inlet valve. Is there a way to check either of these to determine which it might be? Or am I...
My washing machine has clogged up in the cold and will not empty out. I assume that ice has clogged the pipes. How can I get the machine going again.
The ice maker in my sub zero model 561 has continued to make ice even though the switch has been turned off. Now the ice drawer is jammed and the ice maker is jammed with ice cubes stuck together. How can I open the drawer and what can I do to fix this issue?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
