Ask Experts Questions for FREE Help !
Ask
    papawily's Avatar
    papawily Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 7, 2011, 10:12 AM
    Coleman furnace
    Pilot lites up, blower comes on, but no flame up.

Check out some similar questions!

Coleman Furnace [ 8 Answers ]

I Have a problem on a Coleman furnace, model # DGAA070BDTA. The problem is when the furnace kicks on, it lights the hot surface ignitor and lights the burner, but as soon as the fan comes on the burner shuts down and cycles about 5 times then shuts down. I have changed the board 2 times, replaced...

Coleman furnace [ 4 Answers ]

I have a coleman 7900b furnace that will run on continuous but the blower will not kick on on automatic. It works fine on the air conditioner setting but will not on the heater setting. Any suggestions?

Coleman furnace [ 1 Answers ]

Blower will not come on in auto

Coleman Furnace 25 YO [ 2 Answers ]

I rent a double wide trailer and the furnace is the original furnace over 25 years old. At times the furnace will cycle 30+ times prior to actually kicking on to run. There is no consistency to when this happens so I can't track why. I usually keep my heat between 62-68 degrees throughout the...

Coleman Furnace [ 1 Answers ]

Burner will not stay light. Fan comes on, ign. Box activates, ign. Comes on, gas sol. Opens, Flame for 2-3 sec. ign. Box de-activates and drops gas sol. Ignitor after hot reads 40 ohms, cooling off as high as 170 ohm. Replaced: Ignitor box Gas sol. Blower PC Furnace was flooded with...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.