Ask Experts Questions for FREE Help !
Ask
    Klsanders's Avatar
    Klsanders Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 7, 2011, 08:25 AM
    How to clean the blower and motor.
    Removing and putting it back
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Nov 7, 2011, 09:00 AM
    Most blower housings have only 2 screws ,remove and slide out,some are hard to get back into the slide-in groves,so if you don`t have to ,don`t pull all the way out,just enough so you can get to it with a shop vac and a brush to loosen dust and dirt

    I hope this helps
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane xv90 blower motor doesn't. Motor is free, unit is 7 years, not t-stat. Thanks [ 2 Answers ]

I believe I have troubleshot this down to either the blower motor or their Integrated Controller board. 120VAC to motor OK but too many other wires from board to motor for motor control to test (variable speed) without advice or a manual. Motor is rated for 100% duty cycle and has only been run...

Fan Motor or Blower Motor? Trane XB80 [ 0 Answers ]

Outside fan motor clicks and hums - are the fan motor (outside) and blower motor (to circulate the air) tied together? i.e. if one is out, neither will work? If so - how do you diagnose which motor is out? This is on a Trane XB80 Furnace & Air Conditioner

Has anyone upgraded their Furnace Blower Motor to the new Emerson Eco Motor? [ 0 Answers ]

The Eco Motor is supossed to be much easier on the power consumption.

Blower motor , how do I get the basket out to change motor [ 2 Answers ]

Please help I have a 96' comfortmaker and I cannot get to the motor to change it how do I do it?

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

View more questions Search