Ask Experts Questions for FREE Help !
Ask
    jojobracey's Avatar
    jojobracey Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 6, 2011, 12:50 PM
    Rite-Temp 8050 Thermostat?
    I set the heat to come on yesterday during a cold snap. Now it is stuck in heat mode and will not switch to cooling. Tried reseting system.. removing batteries.. replacing batteries... nothing works

Check out some similar questions!

Rite temp thermostat wiring [ 2 Answers ]

I have an electric forced air furnace. The thermostat was not kicking on in the auto position. Had to put it in manual fan to get heat. Occasionally it would work in the auto position. Finally had an electrician replace it with a Rite Temp 6025 thermostat. It worked well for a week. Now...

Rite temp thermostat connecting jumpers [ 1 Answers ]

I don't get the whole jumper thing... do I need to connect wires on the "jumper" connections and then into the corresponding colors?

Installing a new rite temp 6036 thermostat [ 0 Answers ]

I recently purchased a RiteTemp 6036 thermostat to replace the original thermostat in my house. I have a Goodman CPLE30-1 Heat Pump and a Goodman ARUF030-00A-1 Air Handler. The current wiring scheme is E, G, Y, R, O, W2. On the new thermostat, there is no install schematic for that setup. Can...

Rite Temp Thermostat and Carrier Comfort 80 [ 2 Answers ]

Hi! Today I felt cold in the house and went over to the Rite Temp Digital Thermostat we have, and when I touched it, I shocked it and the temperature went from 67 to 74. It has not worked since. We changed out the thermostat and put in a different model for Rite Temp and it still will not...

Rite Temp digitial thermostat [ 1 Answers ]

Why does my digital display show the word 'filter". I just changed the filter about 2 weeks ago.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.