Ask Experts Questions for FREE Help !
Ask
    jackofalltradea's Avatar
    jackofalltradea Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2011, 05:55 PM
    My tempstar furnace will only work if the blower is turned on bythe remote fan switch
    The blower motor is new. The fan relay switch is new and the limit switches are new. The furnace works fine, and cuts in and out at the thermostat setting, but only if the remote fan switch is in the on setting. The blower motor is a two speed model. The furnace model is CUGI125AF01 serial #L904165468. Any help would be appreciated.
    Thanks in advance
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Nov 6, 2011, 03:27 PM
    Who did the repairs on this unit? If I am correct here it sounds like someone may have miswired something. If this was done recently, call the repair people and tell them to come back and fix their mess.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My furnace will only work if the blower motor is turned on manually [ 1 Answers ]

Tempstar furnace only works if blower motor is turned on manually with remote switch. Any ideas why?

Will a Hampton Bay Fan or HarborB remote work to replace a Hunter fan remote control? [ 1 Answers ]

I bought a used Hunter fan Model 23530 and it is missing the remote control Model 85095-01, Freq: 350Mhz, Battery 12V, Type 23A, MN-21 or equivalent. I have several Hampton Bay fan remotes that work. I also have a Harbor Breeze fan remote that I could use. They have the same functions and...

How do I install a fan/blower switch on my furnace [ 5 Answers ]

Hi, I would like to add a switch to my furnace so I can turn the fan/blower on and circulate air in our house in the summer. If you look at picture 'B' below you can see I wire sticking out from the 'R' connection - I tried to jump the 'R' connection with the 'GH' but it did not work after I...

Ceiling fan does not work with remote or wall switch [ 2 Answers ]

We have a Hampton Bay Miramar 60" fan that is wired to a wall switch and has worked for five years. Now it not only won't work with the remote but when the wall switch is turned on, the lights strobe. We have checked the remote to make sure it is programmed the same as the fan, and of course,...

Hampton Bay Ceiling Fan w/Remote SWITCH WILL NOT WORK [ 1 Answers ]

I have installed all new ceiling fans in the house. They are all Hampton Bay's with remotes. The one in the kitchen and dinning room work by both the remote and the switch. However, when I installed the ones in the bedrooms, the wall switches will not work. There is a "red" wire up in the...

View more questions Search