 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
3 way light/fan control
I want to control a fan/light from 2 locations (3way) but I want it to fit into 1 switch per location? I haven't found any 3 way combined switches so here is my idea. I have 2 hampton bay remotes (191-707). Normally the power supply goes to the remote's 1st black wire and then the remote's second black wire feeds the power up to the fan. If each remote is supplied does it matter if there are two lines feeding to the fan assuming that the wires feeding the fan are joined togeather at the fan itself?
|
||||
Check out some similar questions!
I just replace my kitchen light with a new ceiling fan w/light. I now was going to try to install my hunter ceiling fan & light control switch. The switch has a black, blue and red wire w/green ground. The wall outlet has a black, red and white wire with ground. I just wasn't sure which wires...
I need this replacement part (part number 84368-060) and do not know where to locate one. I have looked on web sites to no avail. Any ideas??
Switch for light control broke off. Having trouble taking off wall light switch cover. I removed the skrews but the switch cover doesn't pry off wall. Thanks.
Is it possible to add a receiver that would split the power (lights and Fan) in the Fan box then use a single gang switch that has the transmitted to control the lights (dim and bright) and fan independent from one another. The only thing I would have to make sure is the fan switch should only be...
I am currently remodeling my home and am coming across a major problem that NO ONE seems to have an answer for. I have two ceiling fans that operate via remote control. The rest of the ones in my home are the popular "pull down" chains - and those work prefectly with the new fan/light dimmers...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
