Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water softener salt bridge
[ 2 Answers ]
We have a Kenmore water softener about 14-18 mo. Old. For at least 5 mo. I have had a recurring salt bridge. I break it up as per manual instructions, and the salt level goes down about 1/2 inch before the salt bridge recurs. There is no odor, no discoloration, just a water softener that doesn't do...
Salt from water softener contaminated hot water pipes
[ 1 Answers ]
Since I could not lift bags of salt to fill the container of my water softener, I just unplugged the softener instead of turning off the main valve; therefore, apparently the water continued to flow through the remaining salt until it was gone. In the last year, I have been through two brand new...
Rainsoft Water Softener - Salt tank not filling with water?
[ 1 Answers ]
Put a bag of salt in my softener today and it appeared to be way over the brine level. Checked on it a few hours later and still had dry pellets on top. Manually regenerated the system - no fill. Letting it go through its cycle now, but wondering if there's something I'm overlooking. There's...
Water Softener Using Excessive Salt
[ 3 Answers ]
I have a water softener that is approximately 10 years old. Over the past few months it Has started to use an excessive amount of salt; now up to about 200 pounds per month. Should I replace it or is there an easy fix?
Water softener doesn't use any salt
[ 1 Answers ]
My water softener runs but never uses any salt. Any ideas as to the problem? Thanks View more questions Search
|