Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a duel zone heating system zone one doesn't work but zone two does.
[ 0 Answers ]
I already replaced the circulator and thermostats. This is oil fired furnace with baseboard heat. T he pressure on the furnace is running about 30 psi
2 zone thermostat
[ 1 Answers ]
I am looking for a compatible digital thermostat for my system. It is a trol a temp system from 1989. One blue one white one red wire. It is a power on and power off system. I need power to open the damper using red and white while opening it kicks on the furnace. Power then goes from white to...
2 zone oil heat, 2nd zone runs 1st zone
[ 1 Answers ]
Hi, We have a 2 zone oil burner. The 1st zone (upstairs) runs separately and works no problem. The 2nd zone(basment), when we try to run 2nd zone separately , it seems to run zone 1(upstairs) and the baseboard heating upstairs gets hot and heats zone 1 even thought we have the t-stat set low...
Thermostat 2 zone wiring
[ 2 Answers ]
During winter, heat worked great for both zones, one up and one down. When calling for AC now, only down zones works (compressor and fan kick on and AC flows). While the down zones works, it does pump some AC to upper floors, but not a strong air flow, so it does cool, just very slow... The up...
Programming 3 zone thermostat
[ 3 Answers ]
I have a multi level home, and it's set up in 3 zones so I can set my thermostat for each zone, up to 4 periods per day, for the whole week(HVAC tech says they now claim this method really doesn't save $). We are comfy at 68 for heat, so if other zones aren't being used for a period, what is... View more questions Search
|