Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Gas furnace not cutting on, white rodgers thermostat not clicking when moving lever
[ 3 Answers ]
Fan works and ac cuts on but furnace will not by moving thermostat
How do I wire the thermostat though the gas heater
[ 1 Answers ]
Can you show me how to wire thermostat to the gas heater please
Gas Heater Thermostat
[ 3 Answers ]
I recently bought a farm house with basement. All the water pipes are in the basement. I'm thinking of putting a 2nd thermostat for the heater in the basement and set it at 35 degrees to keep pipes from freezing when no one is at the house. I haven't been able to find one. Most don't go below 40 or...
Heater fan runs then gas burners light
[ 1 Answers ]
Hi I have a carrier gas heater for my home. It is a model # 58dr100ba. When you set the thermostat the blower comes on, runs and then goes off. At that point the pilot light is ignited, and the burners light. After some time the burners og off, thepilot light goes out and the blower comes on. It...
Changed thermostat now heater won't work
[ 1 Answers ]
We changed a white rodgers thermostat out to a honewll round and now in order for the heater to come on you must first turn the fan to the "on" position. The heater will come on but won't turn the fan on so the safety sensors turn the heater off when there is no air flow. I was told that we got the... View more questions Search
|