 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Testing a Carrier Pilot Electrode Wire
What should the maximum resistance in ohms be for a Carrier Pilot Electrode Wire (connecting the igniter/lockout control board to the 3-wire pilot spark ignitor)?
Furnace model: 394JAZ036065AAFA Igniter/lockout control board model: LH33WZ512A 3-wire pilot model: 740A Spark ignitor model: LH680512 |
||||
Check out some similar questions!
Is there a testing tool to find out the l.e.d codes for a carrier furnace heater?
[ 1 Answers ]
Just a quick question.
Where is the pilot on the carrier furnace?
[ 1 Answers ]
Where do I place the mastch to light the pilot on the carrier furnace?
How do I wire a switch with pilot light with 1 black, 1 white, and 1 ground wire?
[ 1 Answers ]
I replaced an outdoor outlet controlled by an interior switch with a Cooper gfci outlet and it tested fine. Then I replaced the existing switch with a Cooper switch with pilot light. The switch has one line coming into it with one white(hot), one black(neutral), and one ground. When I connect...
Carrier pilot
[ 10 Answers ]
My pilot sparks but no flame, I have 300 gal lp ,is the pilot is bad? Payne/carrier #394GAZ048125 with propane kit 310158
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
