Ask Experts Questions for FREE Help !
Ask
    mamatuck's Avatar
    mamatuck Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 3, 2011, 09:02 AM
    If the burners won't light, should the igniter be replaced
    The gas was turned on and off as the manual reads and the thermastat was replaced.

Check out some similar questions!

I have a RUUD Silhouette II furnace UGLH-07EAUER. The igniter lights but burners nev [ 3 Answers ]

Ruud Silhouette II UGLH-07EAUER. The igniter lights but the burners never come on. The furnace then blows out cold air. What can be the problem?

Igniter won't fire blower comes on and then gas but not igniter, status light on [ 0 Answers ]

I have a Rheem Corsair 90%, burners intermittent, replaced about everything... [ 0 Answers ]

5 yr old corsair 90%er burners flash on, then burp, and run then burp, then kicks out and goes to lock out... I've replaced about everything... control panel, pressure switches, gas valve (twice), heat sensor rod, hot wired around thermastat...

I have a big poof at ignition what is that , I replaced the igniter and the ventor st [ 4 Answers ]

I have a keeprite dc90. I have replaced the igniter 3 weeks ago at 100.00 and today just replaced the ventor motor because left me with no heat last night. But I still get a poof on ignition start what could that be. Could it be a cracked heat exchanger, and if so is that a part that keeprite was...

Carrier 58SSC only igniter comes on, no burners. [ 0 Answers ]

This is an older furnace but it has always worked fine until this year. I have had it inspected a couple of years ago also along with my upstairs neighbor who had problems and decided to replace her furnace, which was also a Carrier of the same year. I looked at some of the posts and tried cleaning...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.