Ask Experts Questions for FREE Help !
Ask
    Smaguns's Avatar
    Smaguns Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 1, 2011, 08:50 PM
    Light not working on my Hampton Bay Windward 54 in ceiling fan
    I very recently changed the light on my Hampton Bay Windward 54 inch ceiling fan and the light worked for about a week or two and then the light no longuer works. The fan itself has power and works but not the light.
    SilentG's Avatar
    SilentG Posts: 1, Reputation: 1
    New Member
     
    #2

    Mar 15, 2014, 01:47 PM
    The light kit has a fuse in it. Just replace it and you should be fine =) make sure you turn off the breaker first ;)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling light fan not working [ 2 Answers ]

I flipped on the Hampton Bay Ceiling fan light switch and heard a pop and the light no loger works. Th fan works fine

Replacing the lower light on a Hampton Bay Windward III ceiling fan [ 3 Answers ]

At least that's what I think I have. I have the remote instructions, but seem to have lost the fan instructions. It's the white fan with the Gossamer Wind blades. The lower fluorescent light has become intermittent. Sometimes it will turn on, sometimes it won't. Less frequently, it goes out...

Hampton Bay Windward II ceiling fan wobble [ 1 Answers ]

I have a Hampton Bay Gossamer Windward II 54" ceiling fan. I am having trouble with wobble. I used a blade balance kit, but it really didn't help much. However, I was wondering if I am having trouble because it is a vaulted ceiling and the fan is about 12" from the ceiling at the low point and...

Hampton Bay Windward II Ceiling Fan [ 4 Answers ]

My fan was working fine last winter. When I returned from the South, the remote would not cause the fan or light to operate. I replaced the batteries in the remote to no avail. My guess would be either the receiver or the transmitter has failed. But I don't know how to check it. Any ideas?

Hampton Bay Windward II light/fan [ 1 Answers ]

Light went out on fan; replaced fluorescent light bulb (round thing) and now fan works fine off the remote but light will not come on. Any ideas? Thanks, C


View more questions Search