 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
T90 general control thermostat replacement with new one.
The T90 thermostat terminal is labeled G,F,C,H,V it is 4 wires in and jumper between G and F. The new one has terminals marked Rh,R c,W,Y,G with a jumper between Rh and R c. Which wire do I connect to which terminal? Thanks Tom M.
|
||||
Check out some similar questions!
I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...
Where do you buy and what does a fan relay and sequencer look like for a old GE furnace
This control operated these wall units I have never seen. They look like some 1960s specialty with glass in front of unit.
Trinkett's been a bit "off" recently (you know... there's nothing MAJOR that you can put your finger on, but a lot of little things that just add up to something not quite right), so I took her in to the vet. Who seems to think that it's most likely allergies, possibly with a little colitis. The...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
