 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane XB80 fan problem
On my XB80 furnace, my circulating fan does not come on. I just replaced the bad capacitor, and it runs fine manually. It won't come on with the board controlling it. I have cleaned the flame sensor, new board last year, tested multiple leads for continuity, and check board for output on fan terminal. No power at fan terminal after the relay clicks. The inducer comes on fine, the flame ignites fine, but then it kicks out on high limit when it over heats because the fan does not come on. Any ideas. I don't know what is supposed to signal the board to turn the fan on, but with the relay clicking, I would think that the signal was sent.
Thank you Bob BUMP BUMP |
||||
Check out some similar questions!
On my XB80 furnace, my circulating fan does not come on. I just replaced the bad capacitor, and it runs fine manually. It won't come on with the board controlling it. I have cleaned the flame sensor, new board last year, tested multiple leads for continuity, and check board for output on fan...
Outside fan motor clicks and hums - are the fan motor (outside) and blower motor (to circulate the air) tied together? i.e. if one is out, neither will work? If so - how do you diagnose which motor is out? This is on a Trane XB80 Furnace & Air Conditioner
Today I tried to turn on the air for the first time in my home and no fan, on either auto or on, neither with air or heat. I have been out of the house for 2+ months, my wife said that it worked fine until now. I've replaced thermostat, and checked all breakers. Power switch to furnace and ac...
I have a trane xb80 that is about 8 years old and the fan runs all the time can anybody help with this problem?
Trane XB80 fan turns on my condesor but when the compressor turns on my condesor turns off
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
