Ask Experts Questions for FREE Help !
Ask
    sdwn23's Avatar
    sdwn23 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 29, 2011, 10:19 PM
    My 2 ton ac pressure gauge reading 38 how many pounds of freon needed to read 70?
    I had a guy I know from work come out and check it and he put freon in and it was reading 80 how many pounds did he put in the unit? The unit is a 2 ton and I paid him a 100 dollars
    sdwn23's Avatar
    sdwn23 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 29, 2011, 10:27 PM
    Oh this is for r22
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the norm PSI gauge reading for a 1 1/2 ton compressor on the heat pump side [ 1 Answers ]

1.5 ton Goodman Heat Pump > putting out cool air while in heat cycle. While, I don't expect you to gauge this accurate but, what is the norm Psi setting low side and High side for this size unit? Thank you!

How many pounds of freon will the carrier infinity lose before it shuts down [ 1 Answers ]

How many pounds of freon will the carrier infinity system lose before it shuts down? The unit is 2 1/2 years old. I had a service tech come out and service the unit. He did enough that day to get the heat working because it was 26 degrees out. I was told it took 5 pounds of freon to get it working....

How much freon should be in my amana heat pump, I think it is 2 ton [ 2 Answers ]

How much freon shoud be in my amana heat pump, I think it is 2 ton

R410a pressure gauge reading [ 1 Answers ]

What is gauge reading in lo and high side pressure when using r 410

Pressure Transducer not working? I read 80 psi with Gauge - Replace or not? [ 1 Answers ]

OK, So I'm in the process of adding a sprinkler system to the back yard - and I checked the pressure at the hose bibs w/ a pressure gauge - 80 psi. Well, where the water enters the house (in the basement) there is a pressure reducer "set at 50 psi." I'm under the impression that the thing is...

View more questions Search