Ask Experts Questions for FREE Help !
Ask
    Beasthead's Avatar
    Beasthead Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 29, 2011, 11:09 AM
    Ceiling fans light stopped working?
    I have a Harbor Breeze Bevington Ceiling fan - the other night the lights just turned off. Now the lights don't come on at all, not with the chain and not with the remote. But the fan works both with the chain and with the remote. Thoughts?

Check out some similar questions!

Ceiling light stopped working [ 3 Answers ]

Hello, Last night I turned on the ceiling light in the hallway and it made a popping noise, with a small blue flash at the light, exactly like when a light bulb has just burned out. There are three bulbs in the light fixture and after that none would come on. I changed all three bulbs and the...

Remote stopped working, on Ceiling fans w/lights [ 0 Answers ]

We have 2 ceiling fans w/lights and no wall switch, only remotes, I have switched the remotes, changed the codes and still it will only turn off and on intermittently and now not at all. I switch the remotes back. The one in our bedroom works fine w/either remote. The one in the living room has the...

My ceiling old fan & light stopped working. Is this a danger? [ 1 Answers ]

It is about 15 years old and was never wired into a wall switch. It operated only by a pull chain. There is no remote control. All other outlets and switches in the room work fine. I have pulled the chain three times - to make it off. But I am concerned that perhaps there could be lose or broken...

Ceiling fan/light stopped working [ 1 Answers ]

I have had a Hampton Bay ceiling fan/light dimmer with a remote control. The other day it just stopped working. It doesn't work with the remote control, wall switch or the pull chains. I changed the batteries in the remote and I know there is power to the fan. Any idea how to fix this?

Heritage ceiling fan light stopped working [ 3 Answers ]

I took down the fan to fix a wobble (was coming loose from ceiling) and now the light dies not work. The fan blades run but the light does not work. I replaced the pull chain switch and have checked the wire connections twice put still no light. Any other ideas would be appreciated as I cannot...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.