Ask Experts Questions for FREE Help !
Ask
    Veronica1111's Avatar
    Veronica1111 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2011, 12:05 PM
    I just replaced the batteries on my thermostat but now my furnace won't go on
    I replaced the batteries on my thermostat yesterday and tried to get my furnace going but it won't stay on. I've flipped a couple switches on and off and it will kick on but will not stay on.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Oct 28, 2011, 03:37 PM
    Was it working fine before you replaced the batteries or was it doing what its doing now?
    Veronica1111's Avatar
    Veronica1111 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Oct 29, 2011, 02:08 AM
    It was working fine. The batteries in the thermostat died and I tried to increase the temperature but couldn't due to the unresponsive thermostat. It was programmed to go down to 65 during working hours when I'm usually at work but was home sick and wanted it warmer. I replaced the batteries and now the furnace won't respond. I increase the temperature in the thermostat and nothing happens. Is there some type of reset switch that I need to trigger in the furnace itself?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace won't stop blowing air - replaced the thermostat [ 4 Answers ]

I have a Janitrol U-29A that is probably about 8 years old. I don't when it started, but sometime over the summer it began acting up. The blower does not stop blowing air unless I turn off the furnace at the circuit breaker. The AC unit outside turns on and off through the thermostat, but the...

Can NiCd batteries be replaced w/ NiMh or others in solar lights [ 3 Answers ]

Are one type of rechargeable batteries interchangeable with other types of rechargables? Specifically, I was wondering about replacing NiCds with NiMh or some other type in solar lights.

Change batteries on thermostat [ 1 Answers ]

The batteries ran down on my Maple Chase thermostat 09600 and I had a "lo bat" signal that was steady. I have changed the batteries several times, but I still get the "lo bat" signal and I cannot get my air conditioning to work. The replacement batteries are new and I know they work. I hope you can...

Thermostat Batteries Hot [ 3 Answers ]

I have a white rogers digital thermostat 80 series #1F86-344. The digital display went out and I thought it was time for a battery change. I removed the batteries and they were HOT! Any ideas? Thanks For A Reply.

Replaced T-stat batteries... Now the AC/HEAT does not work at all! [ 5 Answers ]

Good morning and Happy Columbus Day everyone. I must say that anyone's help and feedback will be much appreciated. Last night the Thermostat (Honeywell Programmable CT8602) gave the low battery light as my wife was looking to drop it a degree before bed so she decided to replace the batteries. ...

View more questions Search