Ask Experts Questions for FREE Help !
Ask
    cherr's Avatar
    cherr Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2011, 01:53 PM
    Goodman furnace won't stay on after warming up
    Everything starts sometimes stops after a few minutes or few seconds. Tries to restart again. Starts
    Then shuts downs tries to restart again pretty much dead.
    The red light stays on does not flash,
    What could it be what do I need to check.
    Thank you
    Cherr
    budo1219's Avatar
    budo1219 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Oct 27, 2011, 06:42 AM
    I replaced moudgel but now the red light is not on
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman GMP100-3 Furnace won't Stay On. [ 14 Answers ]

Hello, I have a Goodman Furnace (model # GMP100-3). The furnace will not stay running. Here is the sequence of events for two different scenarios that are occurring. Scenario 1 1. Thermostat Calls for Heat 2. Inducer starts 3. Pressure switch closes 4. Heating element glows 5. Burners...

Goodman furnace comes on but won't stay lit [ 6 Answers ]

Hi my goodman furnace tries to lite but something cuts the gas right back off. Is that the gas regulator? And can I just replace the module on the front of it or do I have to replace the whole regulator? Thanks Brian

I have a goodman furnace that seems to not stay lit. [ 2 Answers ]

I found the same issue or question that was previously asked about a year ago regarding a goodman furnace not staying lit after it power cylcled off 2-3 times. I would like to see the response or answer that Junior________ received. (sorry didn't catch the full name of the asker)

Goodman furnace won't stay lit [ 1 Answers ]

I have a goodman furnace that goes like this. Inducer fan comes on, 10 secs later glow lights up, 10 secs later get blue flames 10 secs later blue flames goes out. Repeats 3 times I have replaced the flame sensor still same problem But here is the thing. I am only getting 10 volts to the...

Goodman Furnace won't stay running [ 3 Answers ]

I have a goodman furnace that won't stay on.. the glow plug comes on and ignites the heat box, it will run then shut off... after it gets to desried heat,, then when you try to get it to run again it's like it shuts down after igniter being lit for about 10 secs, I've replaced batteries in...

View more questions Search