 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to fix your furnace from short cycleing from the 1940?
Hi I have a wards furnace from the 40's I can't get it to stop short cycling I have changed the tromstat, thermo coupl, rewired half of the electcial due to wires being so old' cleaned the flut out, and changed the limit switch I can't get to stay running it wants to short cycle the filters are clean also I am woundering that the gas valve may be bad. I am getting about 19 to 20 volts from the transformer I don't know what else to do can anyone please help.
|
||||
Check out some similar questions!
I have a heil high efficient furnace that ignites fine but when blower starts gas valve shuts down
When I hooked up a brand new generator it blew our all of my surge protectors even caught one on fire
Hi guys, I have a forced air Tempstar propane Furnace with a weird problem. It starts pretty normal: The thermostat tells it to turn on and the main blower for the house vents starts up. Shortly later the exhaust blower starts and the burners ignite as normal. Then it gets weird. The...
Hello Again, Thank you for the previous help suggestions. The last suggestion I received mentioned the possibility of a defective limit switch. I replaced the switch but that did not solve the problem. However, I did received a fault LED, "defect or flaw in gas flow". I checked my line,...
I have a Trane XL80 (Model #TUD060A936A0) that has been converted to a White-Rodgers (Model #50E47-060). When the thermostat calls for heat, the furnace short cycles until it is manually shut off. There is no indicator light on this unit to tell me what the problem may be. What else could...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
