Ask Experts Questions for FREE Help !
Ask
    marybailey51's Avatar
    marybailey51 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2011, 06:52 PM
    Setting pressure on a pumptro switch.
    We installed a Whirlpool WHELJ1 gold central water filtration system. The pump clicks on and off with the by pass open. When we turn the by pass off the pump runs normal. What would be the problem? We have a square D switch.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Oct 27, 2011, 07:38 AM
    Hi Mary and welcome to The Plumbing Page on AMHD.
    You piggybacked on a 2 year old dead thread so I gave you one of your own. Before you post look in the upper left hand corner for the date..
    What's a "Whirlpool WHEL and what are you bypassing? Back to you, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing the points on a pumptro "d" model pressure control [ 1 Answers ]

Can anyone tell/explin how to property replace the points on a D model PumpTro control switch ( very old switch about 1980 ) Bill

Pressure switch setting for connsolidated industries quatrod furnace [ 0 Answers ]

CONSOLIDATED INDUSTRIES QUATROD PRESSURE SWITCH SETTING in in. of w.c. Mod # mba100nh3r Ser# 950609202

York residential furnace pressure switch problem code stuck switch [ 1 Answers ]

I have a york furnace P2MD12H06401A after 1 hour it shuts down and gives a 2 flash error for a stuck pressure switch. The switch is new can it be wired wrong? The old one had 2 white wires piggy back and 1 blue wire. The new switch has 3 separate terminals

Setting pressure on a pumptro switch. [ 1 Answers ]

How do I set pressure on a pumptro switch on well

Limit switch setting [ 2 Answers ]

Just bought a house with a new furnace installed last year but never used because the previous owner passed away so I'm working out all the bugs out. Took care of the thermostat issue now its setting the limit switch... right now low is 110 med is 155 and high is 200 the blower doesn't blow for...

View more questions Search