Ask Experts Questions for FREE Help !
Ask
    VAWhvac's Avatar
    VAWhvac Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 25, 2011, 05:45 AM
    New control board old trane
    Just put on new conversion control board on trane 80. Led lights up but nothing happens. Jumped thermostat and inducer and blower comes on but light blinks 4 times( open temp limit circuit). Have my family in house n its turning cold. Worked on many units install not tech. Need help.

Check out some similar questions!

Trane control board fuse blowing [ 6 Answers ]

Help! A/C unit went out last night. Opened inside unit up (Trane XE80) and pulled the 5 amp blade fuse on the control board and saw that it had blown. Replaced the 5 amp fuse, closed the panel, and the blower started. When I went to turn on the A/C, the 5 amp fuse blew again (and again). ...

Replacing Control Board on Trane Unit [ 17 Answers ]

Hello, Does anybody have any experience replacing the control board (CNT 03798) on a trane unit? I had an HVAC guy check out the unit, and he told me that was the part that needed replacing. I'd like to do it myself to save several $100.00 on the job, but I've never done it before. It...

Diagnosis of control board in Trane unit [ 10 Answers ]

Hi there... This is my first question and I would appreciate your expert help: The circuit breaker for my Trane central air unit tripped and upon further investigation, I found some sort of short circuit behind the Integrated Furnace control board CNT 2789. I saw a big spark behind the board...

Trane XE80 Control Board / Booster Fan Questions [ 4 Answers ]

The blower on my parents Trane XE80 gas furnace stopped working this weekend and a local HVAC company diagnosed the problem as a bad control board. The technician didn't have a board on his truck so he temporarily bypassed the control board and wired the fan to stay on 100% of the time until he...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.