 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat to a coleman air and heater setup?
I have a Coleman heating and air conditioner system model #3500A800and I am trying to hook up a Honeywell thermostat model #RTHL111B1001 up. Nothing happens when I hook it up I am assuming I have a wire wrong or the wrong thermostat. The old thermostat is a White Rodgers
4 wire system with a red yellow white and green wire. I had to replace the terminal strip that wired into the thermostat so is it red to red yellow to yellow green to green and white to white? |
||||
Check out some similar questions!
My air was not working so I called a repairman that works on mobile homes and he replaced the main circuit board And got the air working( $310 ), $180 FOR THE BOARD ONLY. After a few days I noticed the blower cycleing on then off many times while the air was running.I did not think it did that...
I am currently on the winter heating setting. Can I just put the switch on to Cool for the air conditioner. Is there anything else I need to do. Can I keep the pilot light on?
The fan stops spinning but it sounds like it's still running. It also stays on in the off position on the thermostat. I can turn it off with the circuit breaker.
My home is about 16 years old and I've lived in it only 22 months now. My thermostat works fine except when I sit in my favorite chair to watch TV, the vent for the heater/air conditioning is right on top of me on the vaulted ceiling in my living room. I don't use my heater in the winter because I...
I have a Coleman Forced Air Type Furnace. The model is #BGU09516. It is not working. I replaced the motor and it still does not work; maybe it's a connection problem. It still blows out cold air when it's turned on, but it does not provide heat. I was wondering what some solutions might be to fix...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
