 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem water heater heating sporadically.
Yesterday my Rheem hot water heater with automatic ignition stopped heating the water. I turned the thermostat on the unit up from 1/4 hot to 3/4 hot and the automatic ignitor turned on, the burner turned on, and the heater ran and made the water hot. A few hours later I turned the thermostat back to 1/2.
This morning, no hot water. I turned the thermostat back up to 3/4, the ignitor turned on, the burner turned on, and the heater worked again. The water is hot. Is this a temperature sensor problem? Thermostat problem? Please help. |
||||
Check out some similar questions!
Does anyone know how to change the anode on a model with insulation on the top under the cover?
We've just had our water heater changed yesterday and there appears to be a marked reduction in the water pressure not only in the shower but also in in the fauctes in our apartment ? All the fittings are the same except as the inlet was slightly higher than on the original unit, we have had to...
How do I shut off the water to my Rheem water heater. It is leaking
How do I shut off the water to my Rheem hot water tank. 40 gallon model # 21IR40DV
I have 50 Gallon Rheem gas water heater that has a igniter button. The water heater will not light when pushing the igniter button. The gas line is open. The tank is only 3 years old and was winterized before we moved in. Do anyone know how to light or bypass the igniter button to light this tank?...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
