Dornback furnace does ignite but goes off as soon as it lights

Check out some similar questions!

Carrier furnace 58rav115-16 blower runs but furnace will not ignite [ 0 Answers ]

I have a 58rav115-16 caarrier unit. Lst week I replaced a suspected bad draft limit switch(code31) ran fine after. This morning I got up and the blower was running but it would not ignite. I switched to emergency heat and received a code31. I bypassed the draft switch and was able to get the them....

Furnace burners ignite but won't stay lit on my trane xe78 furnace? [ 0 Answers ]

I have a Trane XE78 furnace and the flames come on for about 5-10 seconds and then shut off. They re-ignite about 10 seconds later, then shut off 5-10 seconds after the 2nd ignition. I believe they flame on one more time, shut off and then never re-ignite and the blower just runs and runs with...

My Furnace Won't Ignite [ 2 Answers ]

I have a 1980 propane furnace. The pilot light will light. And the heat will kick on after the lighting. But after the furnace gets to the desired teperature the first time, the pilot light goes off and i have to start the process all over again. How do i keep the pilot lit and thereby keep the...

Furnace will not ignite [ 1 Answers ]

My furnace will not ignite, it's a coleman evcon mobile home heating/cooling unit. Is there something that I can do myself to get it to ignite? Or what part might need replaced?

Kenmore Gas wall heater pilot lights, but won't ignite. [ 4 Answers ]

Hi there, I have a 1986 or 88 Kenmore gas wall heater Model # 829.756660 in the home that I am renting. I got the pilot light lit, and the thermostat makes the click noise when I turn it on, but the heater itself doesn't get any flame. Could this be my ignitor? if so can you tell me how to replace...

View more questions Search

Check out some similar questions!

Add your answer here.