Ask Experts Questions for FREE Help !
Ask
    obit11's Avatar
    obit11 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2011, 03:05 PM
    Trane Furnace Problems?
    My trane xe80 furnace will not run I had lighting hit my house is there any thing I can check. On my thermostat I get a little light flashing fan
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Oct 20, 2011, 07:27 PM
    If your good with a volt meter we can try to walk you through it. Have you took a look at the furnace control board and checked the diagnostic light for a code? If not that's the starting spot.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane furnace problems [ 3 Answers ]

I have a Trane electrical furnace with a heat pump. Everything was running fine until 2 summers ago I was having an intermittent problem when I ran the cooling. Even when the set temperature was reached the fan would continue running even though the thermostat had the fan "OFF". Actually the fan...

Furnace burners ignite but won't stay lit on my trane xe78 furnace? [ 0 Answers ]

I have a Trane XE78 furnace and the flames come on for about 5-10 seconds and then shut off. They re-ignite about 10 seconds later, then shut off 5-10 seconds after the 2nd ignition. I believe they flame on one more time, shut off and then never re-ignite and the blower just runs and runs with...

Trane furnace fan problems [ 3 Answers ]

I have a 25 year old Trane forced air furnace with central air. Saturday, I lit the pilot light and set the thermostat to heat. As soon as the burners come on, the fan starts - its never done that before. The fan setting on the thermostat is "auto". The fan limit settings are 90 degrees off and 130...

Trane furnace problems [ 0 Answers ]

Trane heating unit . It runs heat for 5 minutes . Then no heat. Fan just run constantly. On the control mother board light flashes two times means external lockout-exceed cycles

Do trane gas Furnace have belt and how to fix trane gas Furnace [ 1 Answers ]

I have trane gas Furnace and its stopped working the pilot is not working its keep shutting off and also the switch on and off is working but the pilot and burner is not working what should I do ?:(

View more questions Search