Ask Experts Questions for FREE Help !
Ask
    kdmoore's Avatar
    kdmoore Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 19, 2011, 12:57 PM
    My whirlpool ultimate washer 2 stop spinning.
    How to replace or fix a lid switch on a washer?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #2

    Oct 19, 2011, 02:30 PM
    Hi kdmoore and welcome, here's a video that show how to replace. Good luck and let us know how it goes, OK?

    Whirlpool/Kenmore Washing Machine Lid Switch Replacement (part #3949247) - YouTube

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool Ultimate Care II washer will not drain [ 13 Answers ]

The washer runs through the wash cycle but when it is suppose to drain it does nothing. There is no hum just dead. I drained the tub out and disconnected the hose from the back thinking the drain was plugged. But when I did this the rest of the water from the tub drain out no problem. I'm...

Ultimate care whirlpool washer [ 0 Answers ]

Am not able to get hot water to come out... am only able to get cold water washing done. Any clues on this? It was working perfectly and now it isn't.

Whirlpool Ultimate Care II Washer will not spin [ 1 Answers ]

Washer completes wash cycle but when it gets ready to spin it doesn't do anything. I don't believe it is the lid. How do I take off the back panel to possibly correct the problem.

Whirlpool Ultimate Care 2 washer stalls and won't drain [ 1 Answers ]

I have a Whirlpool Ultimate Care 2 washer that will begin a cycle, but stalls before finishing and won't drain. When it stalls it goes completely silent. So currently it's sitting silently half full of water. I'm a fairly handy guy around the house, but know nothing when it comes to...

Whirlpool Washer Ultimate Care II [ 1 Answers ]

Our Whirlpool washer has developed a strong, musty odor. We think it is coming out of the hole in the agitator. Can the agitator be taken off? What could be making a strong smell? I have tried running clorox through, and it doesn't seem to help. Thanks


View more questions Search