Ask Experts Questions for FREE Help !
Ask
    yelir50's Avatar
    yelir50 Posts: 3, Reputation: 1
    New Member
     
    #1

    Oct 19, 2011, 10:44 AM
    Toilet won't flush
    I have not seen this in over 40 years. Brand new toilet.(we tried 3)As soon as you tighten it down it will not flush. If you loosen the bolts abd allow a little air to get past the gasket and the flange it will flush as per normal. Tighten the bolts---no flush. Already snaked the drain and checked with camera --no problem. Old toilet worked for 15 years--retiled floor and walls, nothing will flush.

    Looking for possible answeer anyone!
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Oct 19, 2011, 11:07 AM
    Maybe the old original one did have a leak that allowed air to suck in but not leak water? And you have a blocked or restricted vent?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Oct 19, 2011, 01:44 PM
    Tell me how it won't flush. Water goes into the bowl raises to the top and swirls around before slowly draining away? Backs up and runs over? Will take down liquids but not solids? More details please. Tom
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Oct 19, 2011, 03:11 PM
    Tell us why you replaced the original toilet too please.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet flush: When I flush the toilet the water does not wash all around the bowl. [ 10 Answers ]

Toilet flush: When I flush the toilet the water does not wash all around the bowl. There is always a section at the front that doesn't get washed. I have tried pushing the end of a wire coat hanger around the rim, and I have used copious amounts of cleaner. Does anyone have any suggestions?

After I flush my toilet the water level in the toilet bowl itself is always very low. [ 2 Answers ]

After I flush my toilet the water level in the toilet bowl itself is always very low. How can I fix this issue. Thanks!

Toilet Flushing: tank drains, toilet doesn't flush, brand new toilet. [ 4 Answers ]

I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...

Toilet flush cause howling sound after flush [ 2 Answers ]

AFter flushing the toilet, there is a howling sound. If I turn the water on when it starts the noise stops. This is only occurring in one of the 3 bathrooms.

First Flush of Toilet does NOT work right BUT second flush works great? [ 4 Answers ]

We have 2 toilets and both have the same problem. The first flush does NOT work right and will NOT flush completely, water rises and then goes back down. The second flash works GREAT? We have plunged and clean out all blow or jet holes NOthiNG is plugged? Short of double water bills and the...


View more questions Search