Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing a mercury thermostat for a Hunter Model 44110
[ 3 Answers ]
I have just purchased a Hunter Programmable Thermostat Model 44110. I have taken out the front panel off my old thermostat and notices that my wires are red, white, yellow and green. The panel for the Hunter 44110 has the connections for G, Y, W and the RC and RH have a jumper. What do I do with...
Replacing GE Honeywell Weathertron and Replacing with Hunter Model 44860
[ 1 Answers ]
I need help... I am having furnace problems and I'm hoping changing the thermostat may help. But the Hunter wire diagram letters do not match that on the Honeywell. The letters on the Honeywell are R, T, O, G, Y, X2, B AND W. The wires on the Hunter are RC/R.C.Y1, Y2,W2,L,E,O,B,G.
Replacing a mercury thermostat with a Hunter Model 44110
[ 1 Answers ]
I purchased a Hunter Programmable Thermostat Model 44110. I have removed my old thermostat and the wires it was connected to included red, white, yellow, orange, blue and green. The panel for the Hunter 44110 has the connections for G, Y, W and the RC and RH have a jumper. What do I do with my red,...
Replacing old thermostat with a Hunter 44110. Wiring issues.
[ 4 Answers ]
We had an older CArrier thermostat. The old wiring went as follows... Orange = o/w2 Red = R y/y2 Yellow G = Green C = Black (Common) W/W1 = White New thermostat has the following View more questions Search
|