Ask Experts Questions for FREE Help !
Ask
    sayres's Avatar
    sayres Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 13, 2011, 04:05 PM
    Kenmore front load washer is showing OE
    When at the 39 minute mark on the wash cycle the washer stops and then displays "OE"
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #2

    Oct 13, 2011, 04:42 PM
    Welcome sayres, post the model number for your washer and we'll see what's up, OK? OE usually is overflow, check that drain hose is not kinked. Good luck
    sayres's Avatar
    sayres Posts: 2, Reputation: 1
    New Member
     
    #3

    Oct 13, 2011, 05:24 PM
    Hi parttime, the model number is 796.4012. I have checked the drain hose, but I will double check again and make sure that it is not kinked. Thanks for the help!
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #4

    Oct 14, 2011, 03:13 AM
    Hi again sayres, post the complete model number, it's located under door.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore front load washer [ 1 Answers ]

I have a Kenmore front load washer model 417. The rest I don't know. They put the tag behind the door and with the moisture and heat it wore the numbers off. Anyway, here is my problem. When you press the start button everything seems fine, you hear soleniods clicking and all, but after about 20...

Kenmore front load washer won't agitate/spin if load too heavy [ 2 Answers ]

My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...

Kenmore front load washer [ 2 Answers ]

Kenmore front load washer Mod.# 970-C45192-00, fills, tumble and drains only, no spin during the cycle. The display in any cyle goes to blank when it reaches the last 7 minutes beeps as complete and stops with no final spin. Is this a control board or motor speed board or other ? Thanks for...

Kenmore elite he front load washer [ 0 Answers ]

I have a kenmore elite washer- front load- and I have lost my book on codes. My washer gives the code 11- what does that mean.


View more questions Search