Ask Experts Questions for FREE Help !
Ask
    abiturner12's Avatar
    abiturner12 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 13, 2011, 06:48 AM
    Where can I buy a defrost board for Maytag plus
    AND how much would it be model Maytag Appliance GS2727EAD1
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Oct 13, 2011, 04:00 PM
    http://www.appliance-parts-warehouse...w.cfm?id=51434

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I test a defrost board [ 3 Answers ]

I a 10 year Ruud heat pump UPMC-036JAZ condenser that has no 24v signal at the contactor. The compressor and fan work when I depress the contactor. My defrost board is a Rheem 47-21517-11. Can someone tell me what voltages should be at what terminals when the T-stat is calling for heat? ...

Voltage at Defrost Board [ 0 Answers ]

Hello, my A/C and Heat are working correctly after I replaced a faulty defrost board. However I noticed that when I test voltage on all the wires coming from the air handler (yellow, red, green, etc.. ) at the defrost board, I'm only reading ~5.3V. The defrost board says "24V AC". I can test...

Maytag adaptive defrost control board [ 0 Answers ]

I need to find out where I can find the location of the adaptive defrost control board for my Maytag side by side refrigerator

Need to know placement of defrost control board for MAYTAG MSD2757AEA [ 1 Answers ]

Can anyone tell me the placement of the Defrost control board on a MAYTAG PLUS MSD2757AEA, NEEDS TO BE REPLACE. THANK YOU MUCHhttps://www.askmehelpdesk.com/images/smilies/eek.gif

Defrost control board [ 1 Answers ]

Last winter the heat wasn’t keeping up with the set temp, the outside fan came on, but the compressor would not start, you could hear it trying to start but it wouldn’t come on. The tech said the compressor was short cycling, and it was now "locked up", they put in a new compressor (part was cov’d...


View more questions Search