Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman model gmp 125-4 Rev B
[ 1 Answers ]
I have a goodman 125-4 rev b furnace and the gas valve will not open. I wiggled the wire to what appears to be a fuse in the red line coming into the gas valve and it got gas for about a half second. What is the component in the gas valve wire?
N=3.125 what is the value of n?
[ 4 Answers ]
n=3.125 what is the value of n?
Goodman GMP 125-4 tries to start
[ 2 Answers ]
My 1995 Goodman Gas furnace with hot surface ignition tries to start when the thermostat calls for heat. The Draft Inducer Motor powers up for less than a second than quits. Circuit Board gives steady LED before and after resetting the furnace. Draft Inducer spins freely and Draft Inducer Motor was...
Yz 125 bogging
[ 3 Answers ]
Hi I have a yz 125,2004,it boggs looses power when you corner when racing then it clears itself and seems OK what's wrong,is it clutch,or carburator?? Many thanks
2000 yz 125
[ 1 Answers ]
My yz is not running right. I ride motorcross and when I go into a slow corner and twist the throttle to power out, it bogs down. It seems like I am always in to high or low of a gear. It goes from bogging down to the power band. I looked at the reeds and there was no carbon build up and they... View more questions Search
|