 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
3 piece tub surround installation
Existing walls have ceramic tile.Instead of resurfacing the tile I have been ask to install a 3 piece tub surround.The tile is solid but some tile does not match in color due to repairs.The tile has been resurfaced in the past.Question is can I install the tub surround on the tile.
|
||||
Check out some similar questions!
I'm installing a One-Piece Seamless Tub Surround. How much I should I charge? I don't have to do any plumbing work. Just installation. Charge by the hour? Or For the job?
I bought a one piece tub surround from Lowe's. It did not come with anything to put in the corners. When you push the surround into the corners there is still gap at the top. Where can I get corner caps to fill the gap or what is the best way to install?
I purchased a 3 piece tub/shower surround and replaced the walls with green board,patched all the seams and corners with drywall mud,sanded and ready to install 3 piece unit. Installed first wall opposite fixture wall,drew level line all around the top of the rest of the walls.drilled holes for...
I recently purchased a home with a large juccuzzi jet tub (measures 73" long, 36" deep, and I can go as high as 78" to my ceiling) . I would like to put in a new tub surround, however, I have talked with rona, home depot, and many renovators in my area and they all are telling me that I can not...
What is the best way to intall a tub surround? The green board is already up and primer. There are no instruction to be found. What preparations do I have to do first? Do I have to use mineral sprits on the backing before I apply the adhesive?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
