 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Maytag Front Load Washer Won't Spin
I just replaced the seal and bearing in my 3 year old Maytag Frontload High Eff. Washer, model MAH21PDDWN. The unit runs fine until it gets to the spin cycle but doesn't proceed into the spin cycle. The electronic control panel indicates 9 min. And spin cycle but nothing happens except it continues to drain. Do I have a bad electronic control board or is there a reset on the board?
|
||||
Check out some similar questions!
I have a Samsung front load washer, WF337AAL, that drains, but will not spin. When I get the clothes out, they are still wringing wet.
My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...
Our Kenmore washer will not spin. It goes through the rest of the cycle, and works fine, until it gets to the spin cycle. No error code or anything. Then it just shuts off. Suggestions? Thanks!
My Sears Kenmore front load washer, (model 110.4646) won't drain or spin. I was washing a blanket when it happened. Is there anything I can do to fix this?
I have a 2003 model ge front load washer. I noticed that my clothes were wet after running . I tried to restart washer and washer would not spin but will drain. Any suggestions. Could it need new motor?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
