Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Drain hot water tank before doing work on cold water supply line?
[ 15 Answers ]
I need to install a vacuum relief valve on the cold water supply line for my hot water tank. I know where to install it but I was just wondering what I need to do before doing the work (obviously turn off the water to the house), but do I need turn off the power (its electric) to the hot water...
Clog in water supply lines after replacing section at main municipal supply...
[ 1 Answers ]
I had an exposed water supply line that ran from the city inlet to my house. It was old and rusty so we decided to replace it with a PEX pvc piping. It's the same dia. (3/4") and we replace the one 90 elbow with a 45 instead. When we turned the water back on, it had no pressure, and after my...
Where is a good location for a hot water tank on the main water supply line
[ 3 Answers ]
I have moved my hot water tank to a new location in the basement. The new location is closer to the main water line. The best way for me to describe it is; from the street to my house to the water meter and from the water meter I have 7ft. Of 3/4" pipe. I want to run a 1/2" pipe to my hot water...
Supply line won't stop running. Main water supply off
[ 3 Answers ]
I was doing some bathroom remodeling and attempted to remove an old supply valve. It would not budge so I decided to cut the copper tubing underneath it and put on a new shutoff valve with a compression fitting. The problem is that water just kept coming out of that supply line. The main water...
How to daisy chain water supply tanks & increase water pressure?
[ 3 Answers ]
The deep water well that supplies our home also supplies another small house on the property that my father lives in. Water supply has never been an issue as it is a great well. The well feeds a small supply tank with switch, then there is two other supply tanks that are daisy chained together... View more questions Search
|