What effect will happen if we use two clutch plate with our flywheel of a tractor?

Check out some similar questions!

Lawn Tractor starter spins but won't engage flywheel [ 6 Answers ]

I installed a new starter on my old Simplicity Lawn 4108 Tractor. The starter was spinning but not engaging the flywheel. The new one does the same thing. I saw a small box bolted onto the engine (enclosed, about 1.5" by 1.5" by about an inch deep) with 2 wires coming out of it and joining the...

Clutch lawn tractor [ 3 Answers ]

I have a Craftsman lawn tractor and something happened while mowing. Now to get the mower to go forward or reverse I have to pull back on the clutch/brake pedal. Works fine as long as I have it pulled back, but my foot is getting tired holding it in position so the mower will go. Please help

Remove the flywheel? KOHLER 25hp Lawn tractor [ 1 Answers ]

I need to remove the flywheel from my Kohler 25hp lawn mower/tractor. Having a heck of a time getting it off. Any suggestions? Do they make a tool to remove the flywheel? Or can I improvise? Let's hear some ideas, folks?:(

Flywheel frozen Murry tractor [ 2 Answers ]

OK, here's the problem with ALL the details. Murry tractor 17.5/42. I did an oil change and possibly added too much. White smoke came from the exauhst flooding the yard in smoke. I emptied the oil, cleaned the plug, and let it sit for 2 hours. Then added in oil, (synthetic) probably shouldn't have...

Craftsman tractor starter repair - flywheel removal [ 1 Answers ]

I have a Sears Craftsman lawn tractor with a 19.5 HP Briggs & Stratton engine. The plastic toothed wheel on the starter that engages the flywheel is completely stripped. I have a repair kit but am having trouble removing the starter. Can I safely remove the flywheel instead. I can see that if I...

View more questions Search

Check out some similar questions!

Add your answer here.