 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
94 Honda accord driver side cv axle won't fit !
Hi I have a 1995 Honda accord I was changing the cv axle's , while the rite one was easy It came out and the new one fit smoothly the left cv axle looked different from the one I got from advanced auto. I tried putting the new one it but it was not going in it looked like it was hitting the engine block.They were the same year but the old axle was long skinny and had a clip that bolted on the bottom and the new one doesn't have that . I can't seem to find the axle that looks like the old one any were please some one help!
I attached a picture the old cv axle has were section 14 is on it but a regular cv axle doesn't so I'm stumped |
||||
Check out some similar questions!
I have a 2002 Honda Accord V-6 that leaks only on the driver's side floor (back seat and passenger floors are dry. Door and window seals are fine. It seems to seep and gets worse if driven in the rain as opposed to merely sitting while it's pouring outside. It seems to seep in on the left side but...
I have tried to use a slip hammer, but the axle will not remove from the transmission. Any suggestions?
93 honda Accord AC converted to R134 compressor cycling high side 350 to 400, new expansion and drier
I am replacing my whole axles or CV halfshafts whatever they are called. I got out both of them, and the drivers side popped back in without a problem. However, the passenger side one will not go in all the way. It seems to be hitting something solid. I have jiggled it, hit it with a mallet,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
