Ask Experts Questions for FREE Help !
Ask
    Flyingace's Avatar
    Flyingace Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 1, 2011, 04:25 PM
    Thermostat help
    Changed sears thermostat #387.911120 to a honeywell #rth221b1021/a There are 3 wires from the wall, red to the are, wbite to the W and black to the why. Put them in the same place on the new thermostat as they were on the old. Per instructions from honeywell. Can't get heat. Only cold air. How do I wire the honeywell?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Oct 1, 2011, 06:17 PM
    Is there a jumper between Rc and Rh. If not, you need one.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

I have a hot water heating system , the thermostat uses 12/2 wiring what thermostat [ 5 Answers ]

I am looking for a new thermostat for my home heating. I have an oil burner that uses water in baseboards ( I believe hydronic) the current theromstat uses a 12/2 wire that goes to it. This wire has a black, white and nuetral. The current thermostat is very straight forward and these wires...

Replacing maple chase thermostat with ritetemp thermostat model # 6030 [ 0 Answers ]

Replacing maple chase thermostat with ritetemp thermostat model # 6030

How do you bypass a honeywell basic programmable thermostat to run a/c until bad thermostat is replaced [ 2 Answers ]

Just a quick question.

View more questions Search