Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do you wire a 3 way switch - black screw connected to white wire is this right?
[ 28 Answers ]
I have a 3 way switch I am replacing. It has 4 wires coming out of the outlet. The top two terminals I am going to wire Red left and Black right. The bottom two terminals will be ground left and white right on the black screw terminal. This does not seem right, but an electrician said it is...
I cut the brown wire that is connected to the ac unit
[ 1 Answers ]
I was using bush trimmers and I accidentally cut the brown wire on my ac unit in half. I think it connects to the thermostat inside the house. How can I reconnect the colors and which colors goes to which?
I cut the brown wire that is connected to my ac unit
[ 1 Answers ]
I was using bush trimmers and I accidentally cut the brown wire on my ac unit in half. I think it connects to the thermostat inside the house. How can I reconnect the colors and which colors goes to which?
I need to know how to wire t-stat to condenser unit if colors are yellow red green an
[ 0 Answers ]
How to wire my condenser unit contactor for t-stat wires if clors are green yellow white and red
Ceiling fan wire colors don't match those described in manual - what's the blue wire?
[ 4 Answers ]
My husband was trying to install a ceiling fan this weekend to replace an old one that was there previously. From the ceiling, we have a black wire, a white wire, and a blue wire. However, in the instructions for the fan, it says that in the ceiling we should have a black wire (ungrounded), a... View more questions Search
|