 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I cut the brown wire that is connected to my ac unit
I was using bush trimmers and I accidentally cut the brown wire on my ac unit in half. I think it connects to the thermostat inside the house. How can I reconnect the colors and which colors goes to which?
|
||||
|
||||
|
If the wires were cut, strip back the outside insulation. You will see wires of different color. Strip about 1/2 " of insulation from each wire, solder or use a small wirenut, color to color, tape over the wirenuts to keep water out and you should be good to go.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a 3 way switch I am replacing. It has 4 wires coming out of the outlet. The top two terminals I am going to wire Red left and Black right. The bottom two terminals will be ground left and white right on the black screw terminal. This does not seem right, but an electrician said it is...
I was using bush trimmers and I accidentally cut the brown wire on my ac unit in half. I think it connects to the thermostat inside the house. How can I reconnect the colors and which colors goes to which?
Ok, my weedeater cut and tangled around two small wires running from the back of the outside AC unit into the house. I am thinking this is the thermostat wire. The two wires are red and white running from the house. The two wires from the AC unit that seem to be connected to the red and white...
Where do I put the blue and red wire to the blower on the inside unit
I was given a Hampton bay ceiling fan but no installation manual. Does the blue wire get connected to the white or black house wire?
View more questions Search
|
